HANTEK 80MHZ PC BASED USB OSCILLOSCOPE

Turn your Windows based computer into a powerful 80Mhz two channel digital oscilloscope with 23 measurement functions and PASS/FAIL check. Using the PC's USB port for data communications between the included hardware & software to create the oscilloscope display on the PC's monitor allowing you to preform functions the same as on a standard oscilloscope. The unit ships with 2 x1x10 probes, software CD, users’ manual and USB cable.

Compatibilie with Win98/NT/ME/XP/VISTA and Windows 7
Is USB connected: Uses USB and supports plug 'n play, with 12Mbp communication speed. (Probes & USB cable included.)
Best performance for your dollar: These units have many features that are comparable to the high speed stand-alone DSOs. But costs a fraction of the price.
Can save waveform data in the following formats: .txt .jpg .bmp & MS excel/word.
250MSa/S real time sampling rate in single channel mode (75MSa/S per channel while in dual channel mode

Watch video here

HANTEK 80MHZ PC BASED USB OSCILLOSCOPE SPECIFICATIONS:

Number of Channells: 2
Impedance: 1MΩ 25pf
Coupling: AC/DC/Ground
Vert. Res.: 8 Bits per channel
Gain: 10 milliVolt to 5 Volts in 9 Steps
DC accuracy: ±3%
Timebase: 4 nano Seconds ~ 1 Hour in 38 Steps
Adj. Vertical Scale: 10 millivolts/div to 5 V/div (x1 probe setting)
Input Protection: Diode Clamped input protection
X-Y capability: Included
Autoset Feature: Included, (30 Hz to 50 MHz)
Ext Input: Included
Trigger Mode: Automatic, Manual, and Single
Trigger Slope: plus/minus
Adj. Trigger Level: Included
Trigger Types: Rising Edge and Falling Edge
Trigger Source: Channel 1, Channel 2 & External
Pre-Post Trigger: selectable, 0 to 100%
Buffer: 10KB to 64KB per Channel
Shot Bandwidth: DC ~ 80 MHz
Sample Rate (Max): (1 Ch)150MSa/second /(2 Ch) 75MSa/sec
Sampling Selection: Included
Waveform Display: Intensity,Port/Line, Persistence, Waveform Average,
Network: Open/Close
Vertical Mode: Ch2, CH2, Dual, Add
Cursor Measurement: Included
Math: Fast Fourier Transformantion (FFT), Addition, Subtraction, Multiplication, Division
Bandwidth: 80 MHz
Cursor: Freq and Volt
Data Samples: 10 KiloByte to 32 KiloByte per Channel
Size: 7.5" x 4" x1.4

Users Manual

Here are the software, driver, and SDK files for the HANTEK6082BE.

Check out this blog post for runing the Unsigned Drivers in Windows 10 64 Bit

Unboxing Hantek6082BE PC base Oscilloscope 80 MHz

*Refurbished* Hantek 80MHz PC Based USB Oscilloscope - HANTEK6082BE-R

Refurbished Hantek 80MHz PC Based USB Oscilloscope - HANTEK6082BE-R